Sustainable Agriculture
Soil and Land Stewardship

Erosion Control on Farms

Practical erosion control for farms: residue, cover, contour and terrace systems, waterways and buffers, plus how to spot problems and get NRCS help paying for fixes.

5 min read1,073 wordsUpdated November 2026
Erosion Control on Farms: illustration of a cutaway of soil with roots and an earthworm

Erosion is soil loss in slow motion, and it is easy to miss. A field can lose a fraction of an inch of topsoil in a year without any obvious damage, and yet topsoil forms slowly and the loss is effectively permanent on a human timescale. The fertile surface layer goes first, taking organic matter and nutrients with it. The sediment then clogs ditches and fouls streams. Controlling erosion is one of the oldest jobs of conservation agencies, and the tools are well proven.

How erosion happens

Water erosion begins with raindrop impact on bare soil, which breaks aggregates and seals the surface. Runoff then carries particles downslope. It shows up as:

  • Sheet erosion: a thin, even layer removed across the slope, hard to see.
  • Rill erosion: small channels a few inches deep.
  • Gully erosion: deep channels that cannot be crossed with a tillage tool.
  • Streambank erosion: loss along waterways.

Wind erosion lifts fine particles from dry, bare, loose soil, especially in the Plains and other windy regions, and it damages seedlings as well as soil.

The NRCS soil resource concern pages describe sheet, rill, wind and other forms of erosion and the management options for each.

Know where your risk is

Slope, soil type, rainfall intensity and cover decide risk. Use these steps:

  1. Look up soils and slopes in the Web Soil Survey. It identifies highly erodible soils and slope classes.
  2. Walk fields after heavy rain. Look for rills, sediment fans, muddy runoff and exposed roots.
  3. Mark concentrated flow paths, where water gathers before leaving the field.
  4. Check field edges where sediment settles or leaves.
  5. Photograph problem areas each year to track changes.

Highly erodible land often carries conservation compliance requirements tied to eligibility for some USDA benefits, so talk to your local NRCS and FSA staff. Learn about farm program rules at farmers.gov conservation pages.

Erosion Control on Farms: illustration of a cutaway of soil with roots and an earthworm
Illustration: a cutaway of soil with roots and an earthworm. Original artwork for Sustainable Agriculture.

The first line of defense: cover

The simplest erosion control is to keep soil covered. Residue left after harvest and living cover crops intercept rain and slow runoff. No-till and reduced tillage keep residue on the surface. See reduced tillage and no-till and cover cropping. Fall-seeded cereal rye on sloping corn silage ground is a classic example of a cover crop paying for itself in lost soil.

Slowing and guiding water

Where cover alone is not enough, structural and vegetative practices guide water safely.

  • Contour farming. Planting and tilling across the slope instead of up and down creates small ridges that slow water.
  • Strip cropping. Alternating strips of row crops and close-growing crops such as hay or small grain on the contour traps soil.
  • Terraces. Earthen channels and ridges that break a long slope into shorter ones. They are common on steeper farmland and need maintenance.
  • Grassed waterways. Shaped and seeded channels that carry concentrated flow without cutting a gully. They need regular mowing and care of the seeded vegetation.
  • Diversions and water and sediment control basins that intercept runoff and settle sediment.
  • Field borders and filter strips. Permanent vegetation at field edges that slows water and traps sediment.
  • Prairie strips. Native perennial strips within row-crop fields that cut runoff and soil loss. See prairie strips.

NRCS publishes conservation practice standards for each of these, with design criteria and specifications used by NRCS staff and contractors.

Wind erosion control

For wind, aim to keep soil covered, rough and moist.

  • Residue and standing stubble reduce wind speed at the surface.
  • Cover crops and strip cropping across the wind direction help.
  • Windbreaks and shelterbelts reduce wind speed downwind for a distance several times their height. See windbreaks and shelterbelts.
  • Ridged or roughened surfaces trap particles.
  • Irrigation or timely tillage to bring moisture or clods to the surface in emergencies.

Stream and drainage erosion

Erosion along streams and ditches needs different tools. Vegetated buffers, bank stabilization and managed livestock access protect banks. See riparian buffers and livestock water quality. Ditch and drainage design matters too, since poorly planned outlets cut gullies.

Fixing gullies

Gullies grow, and early work is cheaper. Steps typically include shaping the channel, installing a stable outlet, seeding vegetation, adding grade control structures where needed, and excluding traffic until it establishes. Large gullies need engineering, which NRCS staff can provide through a conservation plan. Do not fill gullies with debris or tires, which often fail and cause worse erosion.

Costs and cost-share

Structural practices such as terraces and waterways cost money, and they need maintenance, but they last decades. Cover and tillage changes cost less up front. EQIP can cost-share many erosion control practices, and CSP rewards whole-farm stewardship. Contact your local office through the state directory or the USDA Service Center locator. For public benefits, ask about the Conservation Reserve Program, which pays annual rent to keep highly erodible land in vegetation; see the FSA CRP page.

Maintenance matters

Practices fail when no one looks after them. A yearly checklist helps:

  • Inspect terraces and waterways after heavy rain.
  • Repair rills and low spots early.
  • Mow and reseed waterway vegetation.
  • Keep equipment out of wet waterways.
  • Remove trees and brush that block flow.
  • Re-evaluate cover and residue each season.

Planning at the farm scale

Treat erosion control as a whole-farm plan, not a single repair. A conservation planner will look at fields, drainage, crops and equipment, and recommend a system of practices. A plan also documents your efforts for program eligibility.

Bottom line

Keep soil covered, slow water and give it a safe path. Start with the fields and spots where soil is moving, fix small problems before they become gullies, and use NRCS planning and cost-share. Few investments on a farm protect value as reliably as keeping the topsoil in place.

Frequently asked questions

What is the cheapest way to control erosion?

Keeping soil covered with residue and cover crops and reducing tillage is usually the lowest-cost approach, followed by grassed waterways and buffers where flow concentrates.

How do I know if my soil is highly erodible?

The Web Soil Survey and your local NRCS office can show soil types, slopes and erodibility classes for your fields.

Should I fill a gully with brush or old tires?

No. Debris often fails and makes erosion worse. Shape the channel, install a stable outlet and establish vegetation, with NRCS guidance for large gullies.

Can I get paid to control erosion?

NRCS cost-share through EQIP and payments through CSP can support many practices, and the Conservation Reserve Program pays rent on eligible land.

Keep reading

Soil and Land Stewardship

Agroforestry Basics

Learn the five agroforestry practices, alley cropping, silvopasture, forest farming, riparian buffers and windbreaks, and how to plan, fund and manage them on your farm.

Soil and Land Stewardship

Soil Carbon Practices

Which farm practices can raise soil organic carbon, how much to expect, why measurement is hard, and how to build carbon for soil health rather than only for credits.