Sustainable Agriculture
Soil and Land Stewardship

Windbreaks and Shelterbelts

How windbreaks and shelterbelts cut wind, protect crops, livestock and buildings, and save energy, with design rules for height, density and species, plus cost-share.

5 min read1,059 wordsUpdated November 2026
Windbreaks and Shelterbelts: illustration of a cutaway of soil with roots and an earthworm

A row of trees on the windward side of a farm is among the oldest conservation structures in America. After the Dust Bowl, the federal government promoted shelterbelts across the Plains to hold soil and moderate the climate for farmers. They are still working today, and modern farmers use windbreaks for more than erosion control: crop protection, livestock shelter, snow management, energy savings, privacy and habitat.

What a windbreak does

Wind meets a barrier and slows down on the leeward side. The area of reduced wind extends downwind for a distance of ten to twenty times the height of the barrier in many conditions, and the greatest reduction occurs closest to it. The effects include:

  • Less wind erosion by lowering surface wind speed and holding soil.
  • Reduced crop damage from lodging, sandblasting and moisture stress.
  • Better microclimate, often with warmer air and higher humidity near the plants.
  • Snow management, where snow is trapped in a controlled place instead of drifting onto roads, yards and feedlots.
  • Livestock protection from cold wind and from summer heat when trees shade the animals.
  • Home and farmstead energy savings, since a well-placed windbreak can reduce winter heating costs.
  • Spray drift and odor reduction in some situations.
  • Wildlife habitat and a visual screen.

The USDA National Agroforestry Center, part of the Forest Service, studies and publishes guidance on these practices at fs.usda.gov/nac.

Types

  • Field windbreaks protect cropland and are placed perpendicular to prevailing winds, spaced across fields.
  • Farmstead windbreaks protect buildings, yards and livestock areas, and are often wider and denser, with multiple rows.
  • Livestock windbreaks shelter feedlots and calving areas, sometimes combined with fences.
  • Living snow fences trap drifting snow upwind of roads, drives or feeding areas.
  • Hedgerows are narrower, more diverse plantings, often serving as habitat as well; see hedgerows.
Windbreaks and Shelterbelts: illustration of a cutaway of soil with roots and an earthworm
Illustration: a cutaway of soil with roots and an earthworm. Original artwork for Sustainable Agriculture.

Design principles

Orientation. Run the barrier across the prevailing wind that causes the problem, which may differ by season. Local NRCS staff know the patterns.

Height. Protected distance scales with height, so choose species that will grow tall enough, and consider overhead power lines and buildings.

Density. A dense barrier gives strong protection close to it with a shorter protected zone. A moderately porous barrier gives a longer, more even protected zone. Evergreens provide year-round density and deciduous trees provide moderate porosity, so most designs mix them.

Rows and width. A single row may be enough for snow control and some field protection. Farmsteads and livestock often need two to five rows.

Length. Extend the planting well beyond the area you want to protect, because wind swirls around the ends.

Gaps. Gaps funnel wind and create damage. Plan gates and crossings carefully, using offset overlaps instead of straight openings where possible.

Space for roots and shade. Roots compete with crops near the trees, and shade reduces yield along the edge. Consider root pruning and give adequate setback.

Choosing species

  • Adapted to local climate and soils. Hardiness, drought tolerance and disease resistance vary.
  • Mixed species reduce loss from pests and diseases. Avoid planting monocultures.
  • Mixed conifers and broadleaves, with shrubs on the windward side to fill lower density.
  • Wildlife value from native shrubs and trees with fruit or nuts.
  • Avoid invasive species. See invasive species management.

State forestry agencies, conservation districts and nurseries supply recommended lists and often low-cost seedlings.

Planting and care

  1. Design with a planner who can sketch rows, spacing and species.
  2. Prepare the site: control sod and weeds, which are the main killers of seedlings. Weed barrier fabric and mulching are common.
  3. Plant at the right time with healthy stock, keeping roots moist.
  4. Protect seedlings from deer, rabbits and rodents.
  5. Water during establishment if needed, with drip lines if possible.
  6. Control weeds and replace failures for the first several years.
  7. Prune and thin as the trees mature, and manage pests.

A windbreak needs several years to become effective, so plan early. Many failures trace back to poor weed control and neglect in the first two years.

Economics and funding

A well-designed windbreak can pay off through reduced erosion, protected crops, lower feed needs for livestock in cold weather, energy savings and snow management. Costs include design, stock, planting, protection and maintenance, and land taken out of crop production.

Funding may be available:

  • NRCS EQIP can cost-share windbreak and shelterbelt establishment. See the EQIP guide.
  • Conservation Reserve Program continuous signup for windbreaks and shelterbelts on eligible land offers annual rental payments. See the CRP page.
  • State forestry and conservation district programs often sell inexpensive seedlings or offer cost-share and planting services.

Rates and availability vary, so check with your local office through the state directory.

Planning around utilities and neighbors

Call before you dig and check where overhead lines, buried pipelines and drain tile run. Tall trees under power lines are a recurring headache, so select low-growing shrubs in those corridors. Talk to adjoining landowners and to your road authority if the windbreak will sit near a road, because setback rules and snow-drift effects can matter. A short conversation with a neighbor before planting is far cheaper than a dispute afterward, and it is common for a shared windbreak or a living snow fence to benefit both properties.

Renovation

Older windbreaks decline as trees die, thin out and lose lower branches. Renovation options include replacing dead trees, adding shrub rows to restore density, thinning and releasing the best trees. NRCS and state forestry staff can assess older plantings.

Bottom line

A windbreak is a long-lived investment that protects soil, crops, animals and buildings. Design by purpose, choose a mixed species palette, protect seedlings and keep up care through establishment. Use cost-share where available and contact local NRCS or forestry staff to start a plan.

Frequently asked questions

How far does a windbreak protect?

Protection extends downwind many times the height of the trees, often cited as ten to twenty times, with the greatest reduction near the barrier. Density and design change the pattern.

What is a living snow fence?

A planting of trees or shrubs placed to trap drifting snow where you want it, away from roads, driveways and feeding areas.

How long until a windbreak works?

Several years. Many benefits begin as trees reach useful height, and early weed control and protection are critical.

Is financial help available?

NRCS cost-share through EQIP, Conservation Reserve Program payments and state forestry or conservation district programs may help, subject to eligibility.

Keep reading

Soil and Land Stewardship

Prairie Strips in Row-Crop Fields

Prairie strips are bands of native perennials within cropland that cut sediment and nutrient loss and boost wildlife. Learn design, costs, funding and management.

Soil and Land Stewardship

Soil Carbon Practices

Which farm practices can raise soil organic carbon, how much to expect, why measurement is hard, and how to build carbon for soil health rather than only for credits.

Soil and Land Stewardship

Cover Cropping: A Practical Guide

How to choose cover crop species, seed them, terminate them and fit them into your rotation, with costs, common mistakes and cost-share options explained.

Soil and Land Stewardship

Reduced Tillage and No-Till Farming

What reduced tillage and no-till really involve, the benefits and trade-offs, equipment and weed control basics, and a step-by-step way to make the transition.