Sustainable Agriculture
Integrated Pest and Nutrient Management

Soil Testing and Nutrient Testing

How to sample soil correctly, choose a lab, read results, use tissue tests, manure and water tests, and turn numbers into fertility decisions for your crops.

6 min read1,219 wordsUpdated November 2026
Soil Testing and Nutrient Testing: illustration of crop leaves with a ladybug and a magnifier

A soil test is the cheapest and most useful tool on the farm. It tells you what your soil can supply, what it lacks, whether pH is limiting growth and whether you are building up nutrients that could become pollution. The challenge is not the lab work. It is collecting a sample that represents the field, picking the right test and acting on the report.

Why test

  • Save money. Skip fertilizer in fields testing high, and focus spending where it pays.
  • Protect water. Avoid applying phosphorus and nitrogen beyond need. See nutrient runoff prevention.
  • Fix limiting factors, such as low pH, which locks up nutrients and cuts crop response.
  • Track change. Repeated tests reveal whether soil fertility and organic matter are trending up or down.
  • Meet program requirements. Cost-share, certification and nutrient management plans often require current tests. See nutrient management planning.

Sampling the right way

A lab can analyze only what you send it, and one tablespoon of soil represents many acres. Take sampling seriously.

  1. Divide the farm into sampling areas by soil type, past management, slope, crop history and productivity. Use Web Soil Survey maps to see soil types. Do not mix areas that differ.
  2. Collect multiple cores across each area, often 15 to 20 or more, in a zigzag pattern, avoiding unusual spots like old manure piles, fence lines, headlands or wet holes.
  3. Use a clean probe, auger or spade, and a plastic bucket, not galvanized, since zinc can contaminate samples.
  4. Sample at a consistent depth, commonly 6 to 8 inches for tilled fields, or the depth recommended by your state, and shallower for no-till or pasture where nutrients stratify. Some tests, such as nitrate, need deeper samples.
  5. Mix cores thoroughly, take a subsample and put it in the lab's bag or box, labeled with field name and ID.
  6. Record locations, using GPS if possible, so you can resample the same spots.
  7. Choose timing. Sample at the same time each year, such as after harvest or before planting, avoiding recently fertilized or limed ground. Allow enough time to get results and amend before the season.
  8. Frequency. Many states suggest every two to four years, more often in intensive systems, high-value crops or fields with large nutrient inputs.

Some farms use grid or zone sampling combined with variable-rate application, which costs more but may pay on variable fields.

Soil Testing and Nutrient Testing: illustration of crop leaves with a ladybug and a magnifier
Illustration: crop leaves with a ladybug and a magnifier. Original artwork for Sustainable Agriculture.

Choosing a lab and test

Use a lab whose methods match your state's recommendations. Many land-grant universities run labs or list certified labs, and extension offices can advise. Check that the lab participates in proficiency testing programs. Common tests include:

  • Routine fertility: pH, buffer pH or lime requirement, organic matter, phosphorus, potassium, calcium, magnesium and sometimes micronutrients and sulfur.
  • Soil nitrate tests, such as the late-spring nitrate test in some regions for corn.
  • Soil health tests, which may include active carbon, respiration, protein indices and aggregate stability. See soil health practices. They add context but do not replace fertility tests, and methods differ across labs. The Soil Health Institute provides information on soil health measurement.
  • Salinity and sodium tests for irrigated or arid soils.
  • Compaction and infiltration checks done in the field with penetrometers or simple tests.

Reading the report

Reports vary, but they usually give measured levels and an interpretation category such as very low, low, optimum, high or very high, plus fertilizer recommendations.

  • pH. Most crops grow best near slightly acidic to neutral levels, though some thrive outside that range. Lime raises pH, and acidifying amendments lower it.
  • Organic matter. Higher values indicate greater capacity to hold water and nutrients.
  • Phosphorus and potassium. Interpretations depend on the extraction method, so compare numbers only within the same method. High phosphorus means a risk of loss and a reason to stop applying.
  • Cation exchange capacity and base saturation. Useful descriptors of soil nutrient-holding capacity. Be careful about rigid ratio systems that lack strong research support. Follow the recommendations used by your state university.
  • Micronutrients. Interpret with local guidance, since deficiencies are crop- and soil-specific.

If something looks odd, ask the lab or extension office. Compare results with previous years and your field observations.

Beyond soil: plant, manure and water tests

  • Tissue testing measures nutrient levels in plant leaves or petioles, to diagnose deficiencies or guide in-season corrections, particularly in perennial and vegetable crops. Sample the right part at the right stage, following crop guidelines.
  • Manure and compost testing gives nutrient content and, for compost, maturity and salts. Essential for credits. See manure management and compost use on farms.
  • Irrigation water testing reveals salts, sodium, bicarbonate, nitrate and contaminants. See irrigation efficiency.
  • Well water testing for nitrate and bacteria protects people and livestock. The EPA's private well pages explain what to test for, and see groundwater and wellhead protection.
  • Feed and forage testing for livestock nutrition. See feed efficiency.

From numbers to decisions

  1. Fix pH first. Lime based on the lime requirement, and give it time to react.
  2. Build, maintain or draw down. For phosphorus and potassium, low-testing soil may need building applications, optimum soils need maintenance equal to crop removal, and high-testing soils need none.
  3. Set nitrogen from crop, previous crop and organic sources, not soil test alone, because nitrogen is mobile and tests vary by region.
  4. Account for organic sources and cover crops. See legumes for nitrogen.
  5. Plan application using the 4R nutrient stewardship framework.
  6. Record the plan and result.

Keeping a soil data file

Store reports with maps, sample locations and dates in one place. A simple spreadsheet tracks pH, organic matter, phosphorus and potassium by field and year. Charting the lines shows trends, such as phosphorus creeping up under manure or pH sliding down under nitrogen fertilizer. Use the data to evaluate your practices and support funding applications. See farm economic analysis tools.

Cost and help

Routine tests are inexpensive compared with fertilizer bills. Some states or conservation districts subsidize testing or provide sampling tools. Local advisors, extension offices and NRCS staff can help interpret. Find contacts on each state page in the directory. NRCS programs like EQIP may require soil testing as part of a nutrient management practice.

Common mistakes

  • Sampling too few cores or mixing different soil types.
  • Changing labs or methods and then comparing numbers directly.
  • Ignoring pH.
  • Testing right after lime or fertilizer.
  • Treating soil health scores as a substitute for fertility tests.
  • Filing the report without acting.

Bottom line

Test regularly, sample carefully, use a lab and recommendations suited to your region and act on the results. Add tissue, manure and water tests when decisions depend on them. A few dollars of testing can save thousands in fertilizer and protect your soil and water.

Frequently asked questions

How often should I test my soil?

Many state guidelines suggest every two to four years, more often for intensive or high-value crops and fields with heavy nutrient inputs.

How deep should I sample?

Commonly 6 to 8 inches in tilled fields, with shallower sampling in no-till or pasture and deeper samples for nitrate tests. Follow your state's guidance.

Can I compare results from different labs?

Only with caution, since extraction methods differ. Use the same lab and method over time.

Do soil health tests replace standard fertility tests?

No. They add information about biology and physical condition, but you still need fertility tests for nutrient decisions.

Keep reading

Integrated Pest and Nutrient Management

Biological Pest Control

How conservation, augmentation and classical biological control work on farms, which beneficial insects and microbes to use, and how to protect them from pesticides.

Integrated Pest and Nutrient Management

Legumes for Nitrogen

How legumes fix nitrogen, which species fit your rotation, how much nitrogen credit to expect, and how to manage inoculation, termination and timing for the next crop.

Integrated Pest and Nutrient Management

4R Nutrient Stewardship

Apply the right fertilizer source at the right rate, right time and right place, with practical examples, conservation pairings, and tools to cut costs and nutrient loss.

Integrated Pest and Nutrient Management

Nutrient Management Planning

How to write a nutrient management plan for your farm: soil tests, realistic yield goals, crop needs, manure credits, application timing and records that protect water.