Manure is both an asset and a responsibility. It supplies nitrogen, phosphorus, potassium, micronutrients and organic matter that feed crops and build soil, and it can replace a meaningful share of purchased fertilizer. But poorly managed manure pollutes streams, wells and air. Good manure management is about capturing the value while keeping the nutrients on the field and out of the water.
Know what you have
Manure varies enormously by species, diet, bedding, storage and handling.
- Solid manure and litter (beef, horse, poultry, bedded packs) is variable in moisture and nutrient content.
- Liquid and slurry manure (dairy, swine) holds more available nitrogen but is prone to losses and runoff if mishandled.
- Compost is stabilized manure, with lower odor and weed seed, and slower nutrient release. See compost use on farms.
Never assume book values are accurate for your farm. Send manure samples to a lab before each application season, and again if feed, bedding or storage changes. Ask for total nitrogen, ammonium nitrogen, phosphorus, potassium and moisture, plus others as needed. Your extension office can supply sampling instructions and conversion tables for available nutrients.
Storage that protects water
Storage gives you the flexibility to apply at the right time instead of when you must empty the pit. Design depends on manure type and scale.
- Liquid storage: lined pits, tanks or lagoons sized for the number of days between application windows, with adequate freeboard.
- Solid storage: roofed or covered stacking areas, concrete pads or compacted bases with runoff controls.
- Temporary field stacking: only on suitable sites, away from water, on flat ground, with cover and time limits, following your state's rules.
- Runoff control: diversion of clean water, collection of contaminated runoff and vegetated treatment areas.
- Inspection and maintenance: regularly check liners, pipes, pumps and embankments.
NRCS offers conservation practice standards and technical help for waste storage facilities, and cost-share through programs like EQIP. See NRCS conservation programs.
Apply to crop needs
Application rates should be based on nutrient needs, not on the volume you have to dispose of. Use the steps in nutrient management planning.
- Test soil and manure.
- Set a realistic yield goal.
- Calculate available nutrients, counting first-year nitrogen availability and longer-term release from organic forms.
- Limit application by the most restrictive nutrient. Manure often has more phosphorus relative to nitrogen than crops need, so repeated applications at nitrogen-based rates build soil phosphorus. In fields with high soil phosphorus, limit rates to crop removal or stop applications until levels fall. Many states use a phosphorus index or soil test thresholds to decide.
- Supplement with other sources if nitrogen is short, such as legumes or fertilizer. See legumes for nitrogen.
Timing and conditions
When you apply matters as much as how much.
- Apply near crop uptake: spring pre-plant or side-dress, and after harvest on fields with growing winter cover. Fall applications risk loss unless soils are cool and crops or cover are present.
- Avoid frozen, snow-covered and saturated soils, where runoff risk is high. Many states restrict winter application.
- Watch forecasts. Heavy rain within a day or two of spreading can carry nutrients to streams.
- Avoid steep slopes and flood-prone fields unless incorporated and protected.
- Consider wind and neighbors to limit odor complaints.
Setbacks and buffers
Leave unspread margins near streams, ditches, tile intakes, sinkholes, wells and property lines, with distances set by state and program rules. Add vegetated buffers between fields and water. See riparian buffers and groundwater and wellhead protection. Tile-drained fields can carry liquid manure directly to surface water through macropores, so avoid applying to wet or cracked soils and consider incorporation with minimal disturbance and drainage control. See drainage water management.
Application methods
- Incorporate or inject liquid manure to reduce ammonia loss and odor, and runoff. Injection also places nutrients where roots reach them.
- Broadcast solid manure with calibrated spreaders and incorporate when practical. Calibrate spreaders with tarp tests to confirm actual rates.
- Surface apply to perennial pasture or no-till fields with care, using lower rates and appropriate timing. Some no-till systems use narrow-band or low-disturbance injection.
- Use cover crops to capture nitrogen after manure applications. See the cover cropping guide.
Air, odor and greenhouse gas
Manure releases ammonia, methane and nitrous oxide. Practices that reduce losses include covered storage, rapid incorporation, lower-emission feeding strategies, and anaerobic digestion with energy capture. See biogas and anaerobic digesters, methane reduction in livestock and nitrous oxide reduction. The EPA's AgSTAR program provides information on biogas recovery from livestock waste.
Livestock regulations
Regulations depend on herd size, location and state law. The EPA regulates concentrated animal feeding operations (CAFOs) under the Clean Water Act, and many states have their own rules and permits for smaller operations. Read the EPA's overview of animal feeding operations, and check with your state agency about permits, nutrient management plans, setbacks, certified manure applicator requirements and recordkeeping. When in doubt, ask before building storage or changing application practices.
Pasture and grazing systems
On pasture, animals deposit manure directly. Management goals shift to distributing it evenly and keeping it away from water. Rotational grazing spreads manure better than continuous grazing, and moving water and feeding areas prevents nutrient hot spots. Fence livestock from streams and provide alternative water. See rotational grazing, livestock water quality and livestock and crop integration.
Selling or exchanging manure
Farms without livestock may want manure, and livestock farms with surplus may want to move it. Provide a nutrient analysis, agree on responsibility for application and consider contracts with neighbors. Keep records of volumes and destinations, since regulations may require them. Pelletized or composted products can be transported farther economically.
Records and review
Record manure analyses, application dates, rates, fields, methods and weather. Note storage inspection results and any issues. Compare yields and soil tests over time. This documentation supports permit compliance, certification, cost-share and your own decisions. Local contacts and agencies for each state are in the directory.
Bottom line
Manure management turns a waste problem into a fertility resource. Store it safely, test it, apply it to crop needs with attention to phosphorus, time it carefully and protect water. The payoff is lower fertilizer bills, better soil and fewer problems with regulators and neighbors.
Frequently asked questions
How often should I test manure?
Before each application season and whenever feed, bedding or storage changes, since nutrient content varies widely.
Why is phosphorus a concern with manure?
Manure often carries more phosphorus than crops need relative to nitrogen, so repeated applications can build soil phosphorus and increase runoff risk.
Can I spread manure in winter?
Many states restrict it because of runoff risk on frozen or snow-covered ground. Check your state rules and use storage to avoid winter spreading.
Do small farms need permits?
Often not, but requirements depend on animal numbers and state law. Check with your state agency.