Under most farms lies an aquifer, and most farm families and many farm operations draw their water from it. Unlike public water systems, private wells are not routinely tested by any agency. That leaves protection and monitoring up to the owner, and groundwater problems are slow to show, slow to fix and expensive when they come. Protecting the water your family and animals drink is a basic stewardship job.
How groundwater gets contaminated
Contaminants reach wells through several routes.
- Leaching of nitrate and soluble chemicals through the soil, especially in sandy or shallow aquifers and on irrigated fields.
- Direct entry through poorly sealed or damaged well casings, open wellheads, flooded wells and abandoned wells that act as shortcuts to the aquifer.
- Spills and leaks at mixing and loading sites, fuel tanks and chemical storage.
- Manure and wastewater from storage, feedlots and spreading too close to wells.
- Septic systems that fail or sit too close to wells.
- Natural contaminants such as arsenic, uranium, fluoride and radon, which occur in some geologies and are unrelated to farming.
The EPA's private well resources cover testing, contaminants and well care for homeowners and are a good first reference. The source water protection pages describe efforts to protect public supply sources.
Test your water
Testing is the single most useful step.
- Test annually for total coliform and E. coli bacteria and for nitrate.
- Test for other contaminants based on local conditions: pesticides, arsenic, sulfate, pH and others. Your state or county health department and extension office can tell you what is typical locally.
- Retest after events like flooding, nearby construction, spills, well repair or a change in taste, odor or color.
- Use a certified lab, since results from non-certified tests may not be reliable.
- Keep records of results and dates to track trends.
Infants and pregnant women are especially sensitive to high nitrate in drinking water, so households with young children should test and follow health department guidance.
Wellhead basics
- Casing and cap. The well casing should extend well above ground with a sanitary cap that excludes insects, surface water and animals.
- Grading. Ground should slope away from the well so water does not pond around it.
- Location. New wells should be sited uphill and away from contamination sources, following your state's required setback distances from septic systems, manure storage, feedlots, chemical storage and fuel tanks.
- Protection from damage. Keep equipment away and avoid driving over well tops.
- Maintenance. Have a licensed well contractor inspect the system periodically.
Manage chemicals and manure near wells
- Mix and load pesticides and fertilizers on a pad or at a location well away from wells and drainage paths, ideally with containment.
- Store chemicals and fuel in secure, contained structures, and keep them away from wellheads.
- Apply manure and fertilizer according to a nutrient plan and avoid application near wells, sinkholes and other direct pathways. See manure management and nutrient management planning.
- Never dispose of waste in wells, sinkholes or ditches that feed them.
- Prevent backflow from irrigation or chemigation systems with check valves and backflow prevention.
Abandoned wells
Old, unused wells are open conduits. Hand-dug wells, drilled wells that are no longer in use and cisterns should be properly decommissioned by a licensed contractor, following state rules, which usually require sealing with approved materials. Some states or conservation districts offer cost-share or technical help. Locate unmarked old wells during farm walks and check old maps.
Irrigation and groundwater quantity
Groundwater protection includes protecting supply. Overpumping lowers water tables and can affect neighbors, wells and stream flows. Efficiency and scheduling reduce use. See irrigation efficiency and water rights basics. The USGS water resources pages provide groundwater level data for many areas.
A simple annual routine
A short checklist keeps wells from being forgotten. Each spring, inspect the cap and casing, clear weeds and debris from around the wellhead and confirm that the ground still slopes away from it. Collect samples for bacteria and nitrate, and send them to a certified lab. Each fall, check chemical and fuel storage near the well, review where manure and fertilizer will be applied over winter and make sure that no new construction, ponds or feedlots have crept closer. Keep the lab reports in the same folder as your pump records and your nutrient plan, so that you and any future owner can see how the water has changed over time.
Treatment options
If testing finds a problem, options include finding another source, treating the water at the tap or entry point, or addressing the source. Treatment choices depend on the contaminant: reverse osmosis or ion exchange for nitrate, disinfection for bacteria, activated carbon for some organics. Always confirm that the treatment method suits your contaminant and have it maintained, since poorly maintained systems can fail without warning. Consult your health department or a certified water professional.
Community and watershed efforts
Public water systems have source water protection programs that identify the area around wells or intakes and work with landowners on voluntary practices. Farmers within these areas may have access to additional cost-share or technical help. Ask your local water utility, conservation district or state source water protection program. NRCS programs may prioritize practices in sensitive source water areas; see EQIP. Contacts for each state are in the directory.
Livestock and wells
Keep animals away from wellheads with fencing, particularly where hydrants and pumps are in barnyards. Protect wells from manure runoff with berms and proper grading. Make sure that water for livestock is tested too. See livestock water quality.
Bottom line
Private wells need an owner's attention: test regularly, keep contamination sources away, maintain the wellhead, seal abandoned wells and manage nutrients carefully. Prevention is far cheaper than treatment, and the groundwater you protect serves your family, your animals and your neighbors.
Frequently asked questions
How often should I test my well water?
At least once a year for bacteria and nitrate, and after flooding, repairs, spills or changes in taste, color or odor. Add tests for local concerns.
What is an abandoned well and why does it matter?
An unused well that was never sealed can act as a direct path for contaminants to reach groundwater, so it should be decommissioned by a licensed contractor.
Who is responsible for private well safety?
The owner. Most private wells are not regulated or tested by public agencies, so owners must test and maintain them.
Can nitrate be removed from drinking water?
Yes, with certified treatment such as reverse osmosis or ion exchange, or by using an alternate source. Consult your health department.