Subsurface drainage tile turned millions of wet acres into some of the most productive farmland in the country. It lets fields dry for planting, reduces crop stress from waterlogging and improves yields on poorly drained soils. It also routes water, and the nitrate it carries, quickly to ditches and streams. Drainage water management is a family of practices that keep the benefits of drainage while reducing the downstream cost.
Why tile drainage matters for water quality
Nitrate dissolves in soil water. In a tiled field, that water moves through the soil to a buried pipe and out to an outlet, bypassing the filtering action of surface buffers and wetlands. Studies of Midwestern watersheds have found tile drainage to be a major pathway for nitrate to reach streams. The EPA nutrient pollution pages describe how nitrogen from farm fields reaches waters and the practices used to reduce it.
The first line of defense is always nutrient management at the source. See nutrient runoff prevention and 4R nutrient stewardship. Drainage practices complement it.
Practice 1: Controlled drainage
Controlled drainage uses adjustable structures at the outlet or in the main line to set the water table height.
- Off-season management. After harvest, raise the outlet so water stays higher in the profile, which reduces the volume of drainage and encourages denitrification in saturated soil.
- Pre-plant and pre-harvest. Lower the outlet before planting and harvest so fields drain for field work.
- Mid-season options. Some systems allow subirrigation, adding water to maintain a water table during dry periods, where supply exists.
Controlled drainage works best on flat fields with uniform slopes, where one control structure manages a meaningful area. On steeper ground, multiple structures or other practices may be needed. Operation takes labor and attention at key times of year. NRCS has a conservation practice standard for structures for water control, among the practice standards.
Practice 2: Saturated buffers
A saturated buffer diverts a portion of tile outflow into a lateral distribution pipe running through a vegetated buffer strip along a stream or ditch. Water enters the soil in the buffer, where roots and microbes remove nitrate before water seeps into the stream. It requires a suitable buffer, appropriate soils and a tile outlet above the water surface, and it works at the field edge without taking cropland out of production. See riparian buffers.
Practice 3: Denitrifying bioreactors
A bioreactor is a trench filled with a carbon source such as wood chips, placed in the path of tile water. Microbes in the oxygen-poor environment use the carbon to convert nitrate to nitrogen gas. Bioreactors suit sites with limited space and can treat tile water from a specific outlet. Their performance depends on flow, temperature and residence time, and they need periodic carbon replacement over years.
Practice 4: Two-stage ditches
Conventional drainage ditches are often deep, steep-sided channels prone to erosion. A two-stage ditch adds a bench within the channel, creating a floodplain that carries high flows, stabilizes banks, supports vegetation and allows some nutrient processing. It is used on larger drainage ditches, often through drainage district work, and needs coordination with ditch authorities.
Practice 5: Wetlands and other edge-of-field options
Constructed wetlands treat tile and surface water, and vegetated ditches and filter strips handle surface flow. See constructed wetlands.
Choosing among practices
| Situation | Practice to consider |
|---|---|
| Flat field, tile outlets under your control | Controlled drainage |
| Tile outlet near a stream with a good buffer | Saturated buffer |
| Single outlet, limited space, steady flow | Bioreactor |
| Large ditch with unstable banks | Two-stage ditch |
| Larger drainage area with space available | Constructed wetland |
Use more than one where possible. Practices combine well, and the nutrient source management upstream is still essential.
Planning and design
- Map your tile. Many farms have old, poorly documented systems. Locate mains, outlets and condition using records, probes and aerial imagery.
- Survey topography. Controlled drainage depends on elevation differences across the field.
- Check soils and water table with the Web Soil Survey.
- Consult drainage contractors and NRCS planners. Design affects both water quality and crop yield.
- Check regulations and drainage district rules, because tile work in many places is regulated, and outlets may belong to a district.
- Plan operation. Write a calendar for adjusting control structures.
Effects on yield and economics
When managed well, controlled drainage can maintain yields and even improve them in dry years by holding water for crops. Poor management, such as leaving outlets raised during wet planting season, can hurt yields. Costs include structures, installation and labor, along with the cost of any bioreactor or buffer system. Benefits include reduced nitrate loss, possible yield protection and cost-share. Since the public gains from cleaner water, programs often pay a large share of costs. See cost-share programs.
Funding and help
EQIP can cost-share structures for water control and edge-of-field practices in many states, and watershed projects through the Regional Conservation Partnership Program and state initiatives may add funding. Land-grant universities and agronomy groups run drainage field days and demonstrations, and conservation districts and NRCS staff can help with design. Find them through your state page in the directory.
Bottom line
Drainage water management lets farms keep productive tile systems while cutting nitrate losses. Combine good nutrient management with controlled drainage, saturated buffers, bioreactors or wetlands, designed with local expertise and operated on a calendar. Use cost-share to share the costs of public benefits.
Frequently asked questions
What is controlled drainage?
Using adjustable outlet structures to raise or lower the water table at different times of year, holding water in the off-season to reduce nitrate loss and lowering it for field work.
What is a saturated buffer?
A vegetated buffer where part of the tile outflow is distributed through the soil so plants and microbes remove nitrate before water reaches the stream.
Does drainage management reduce yields?
Not when operated properly. Mismanagement, such as leaving water high during planting, can hurt yields, so a clear operating schedule is important.
Who pays for these practices?
NRCS programs such as EQIP, watershed partnerships and state programs may cost-share, depending on location and eligibility.