Native plants evolved with local soils, climate, insects and wildlife, which makes them durable and valuable for habitat. A planting of native grasses and wildflowers can protect soil, filter runoff, feed pollinators, shelter birds and sometimes provide forage or biomass. They need less input once established than many non-native alternatives. They are also slow to start and unforgiving of poor preparation, so planning pays off.
What counts as native
A plant is native to a region if it occurred there before European settlement and developed with local conditions. Natives vary within their ranges, and seed from nearby populations often performs best. The term local ecotype refers to such seed. Where seed from exactly your area is scarce, use sources from the same ecoregion or adjacent climates, as recommended by your state conservation agency.
Why plant natives
- Habitat. Native grasses and forbs support insects, which feed birds and other wildlife. See wildlife-friendly farming.
- Pollinators. Native flowers fit local bee species. See pollinator habitat on farms.
- Erosion and water quality. Deep, dense root systems hold soil and slow runoff. See prairie strips and riparian buffers.
- Drought tolerance once established.
- Soil building, with perennial roots adding organic matter. See soil carbon practices.
- Low long-term input. Little fertilizer or irrigation after establishment.
- Forage and biomass in some cases, such as native warm-season grass pastures and hay.
Where they fit
Native plantings work well on:
- Field borders and buffers.
- Waterways and filter strips.
- Marginal, steep or low-yield fields.
- Roadsides, lanes and utility corridors.
- Pastures in native range regions.
- Land enrolled in conservation programs.
- Around ponds and wetlands.
They are not a quick fix on weedy, heavily fertilized ground without preparation.
Plan the planting
- Define the goal: erosion control, pollinator habitat, wildlife cover, forage, biomass, or a combination.
- Map soil, moisture and light with the Web Soil Survey and field observation. Select species suited to each zone.
- Choose a seed mix. Mixes combine warm-season and cool-season grasses and a range of forbs. Many conservation programs have set mixes and rates. Seed rates are often listed in pure live seed per square foot, and your NRCS planner or seed supplier can convert them to pounds.
- Plan for management as you would for any crop, including mowing, burning or grazing.
- Budget for seed, preparation, seeding and weed control.
Plant materials centers, state conservation agencies and extension services publish lists suited to local conditions.
Source quality seed
- Buy from reputable native seed dealers with seed tests showing purity and germination.
- Check species lists and ecotypes. Cheap mixes may include aggressive non-natives or weedy fillers.
- Order early, since popular species sell out and native seed can have lead times.
- Store properly, cool and dry until seeding.
Site preparation
Weeds are the main reason plantings fail. Your options depend on site history.
- Former cropland with good weed control may be seeded with a no-till drill into stubble.
- Sod or heavy weed seed banks require control in the year before seeding, with tillage, smothering, solarization or herbicide as appropriate, and possibly a cover crop or row crop to deplete weed seed.
- Invasive grasses like fescue, smooth brome or reed canarygrass need aggressive treatment. See invasive species management.
- Fertility. Natives do not need high fertility, and extra nitrogen mostly feeds weeds. Soil test, and adjust only for pH or severe deficiencies.
Seeding
- Timing. Dormant seeding in late fall or early spring suits many species that need cold stratification. Warm-season grasses are often seeded in late spring. Local recommendations vary.
- Equipment. Native seed drills handle light, fluffy seed. Broadcast seeding followed by rolling is also used. Calibrate carefully, since seed is expensive.
- Depth. Shallow, about a quarter inch or less for small seed, with good seed-to-soil contact.
- Cover. A light nurse crop such as oats can stabilize soil on slopes, but too heavy a rate suppresses seedlings.
The first three years
Natives spend the first year building roots.
- Year one: mow when weeds reach about a foot tall, set mower high enough to avoid cutting seedlings. Spot treat problem weeds.
- Year two: more flowers appear, continue weed control, and avoid heavy disturbance.
- Year three and after: established stands need periodic management, such as mowing, burning or grazing every few years to maintain diversity and control woody plants.
Be patient. Many a promising planting has been plowed under in the first summer because it looked messy, when it was simply putting energy underground.
Ongoing management
- Prescribed fire or rotational mowing on a multi-year cycle, with only part of the area disturbed at a time.
- Targeted herbicide or hand removal of invasives.
- Grazing with careful stocking in appropriate plantings.
- Monitoring with photos and plant lists.
- Avoiding drift from nearby crop sprays.
Costs and funding
Seed and preparation can cost several hundred dollars an acre or more, depending on species and site, which is why cost-share matters. Programs include:
- NRCS EQIP, for conservation cover, field borders, herbaceous wind barriers and related practices. See the EQIP guide.
- Conservation Reserve Program with continuous and general signup options. See the FSA CRP page.
- Partners for Fish and Wildlife and state habitat programs. See Partners for Fish and Wildlife.
- Conservation districts, which sometimes rent seed drills or provide planting help.
Find your local office in the directory and see habitat funding for farmers.
Bottom line
Native plantings pay off in habitat, soil protection and lower long-term inputs, but only if you invest in preparation, quality seed and three years of patient weed management. Match species to site, use cost-share and learn from local examples.
Frequently asked questions
Why do native plantings fail?
Most failures come from poor weed control, poor seed quality or impatience in the first years, not from the plants themselves.
When should I seed natives?
Many are seeded in late fall or early spring, and warm-season grasses in late spring, with local recommendations varying.
Do natives need fertilizer?
Generally no. Extra nitrogen mostly feeds weeds. Soil test and correct only major problems.
Can I get cost-share for native plantings?
NRCS EQIP, CRP and Fish and Wildlife partners may help, subject to program rules.