Sustainable Agriculture
Energy, Climate and Carbon

Farm Energy Audits

How a farm energy audit finds savings in pumping, grain drying, lighting, refrigeration and ventilation, what it costs, and how to act on the results with USDA help.

5 min read1,089 wordsUpdated November 2026
Farm Energy Audits: illustration of wind turbines and solar panels beside a barn

Energy is a quiet line on the farm budget. Diesel, electricity, propane and natural gas add up across tractors, pumps, grain dryers, milking systems, greenhouses and coolers, and a surprising amount is wasted by worn equipment, poor controls and habits nobody has examined. An energy audit is a structured look at where energy goes, and it usually pays for itself because it points to the cheapest savings first. Reducing use also shrinks any solar or wind system you may later want to build.

What an audit does

An audit measures and analyzes energy use across the operation and recommends improvements with estimated costs, savings and payback. Three levels are common:

  1. Walk-through (screening). A quick look at equipment, bills and obvious opportunities.
  2. Detailed audit. Metering of key loads, evaluation of equipment performance and a ranked list of measures with calculations.
  3. Investment-grade analysis. Engineering design and financial analysis for major projects, often needed for loans.

For many farms a walk-through plus targeted measurements is enough to start. The NRCS conservation planning process also includes agricultural energy management plans, which are described under the energy resource concerns pages of NRCS.

Start with your bills

Before anyone visits, gather a year or more of utility bills and fuel purchases.

  • Electric bills show total use in kilowatt-hours, peak demand in kilowatts and rate structure. Demand charges and time-of-use rates often matter as much as total use.
  • Fuel records for diesel, gasoline, propane and natural gas by enterprise if you can.
  • Production data so you can express energy per unit: per acre, per ton, per bushel, per head or per hundredweight of milk.

Compare months, spot spikes and ask what caused them. A sudden jump in a pumping month may point to leaks or a degrading pump.

Farm Energy Audits: illustration of wind turbines and solar panels beside a barn
Illustration: wind turbines and solar panels beside a barn. Original artwork for Sustainable Agriculture.

Where savings usually hide

Irrigation pumping. Pumps wear, motors are sometimes oversized or mismatched, and system pressure may be higher than needed. A pump efficiency test shows how much energy is wasted, and repairs or right-sizing can cut costs substantially. See irrigation efficiency.

Grain drying and handling. Dryer tuning, heat recovery, in-bin systems, harvesting at lower moisture and aeration controls reduce fuel use.

Dairy and refrigeration. Plate coolers, heat recovery from refrigeration to heat water, efficient vacuum pumps with variable speed drives and well-maintained compressors cut energy. Cleaning condenser coils and checking door seals are cheap wins.

Ventilation and heating in livestock buildings and greenhouses. Efficient fans, controls, insulation, air sealing, thermal curtains and right-sized heaters.

Lighting. Switching to LED fixtures reduces electricity for lighting and heat load, and in poultry and swine houses, controllable dimmable LEDs can also help animal management. Lighting changes are among the fastest paybacks.

Motors and drives. Replace oversized or inefficient motors, and add variable frequency drives where loads vary.

Shop and building. Weatherstripping, insulation, efficient heating and tuned equipment.

Fuel use in field operations. See reducing farm fuel use.

Ask the right questions during the audit

  • Does equipment run when it is not needed?
  • Which loads run at peak times, and can they move?
  • What would happen if we turned this down by 10 percent?
  • Are controls working, and are sensors calibrated?
  • Which equipment is near end of life and should be replaced with efficient models?
  • Where do we lose heat, cool air or water?

Who can do an audit

  • NRCS technical service providers who are certified to develop agricultural energy management plans, found through the NRCS getting assistance pages and your local office.
  • Land-grant extension and state energy offices, which often offer free or low-cost help or lists of qualified auditors.
  • Utility programs, which may offer audits, rebates and incentives for efficiency measures and often have staff who know agricultural loads.
  • Private energy consultants and engineers for complex projects.
  • Equipment dealers, useful for specific systems but with a stake in sales.

Ask auditors for sample reports and references from farms like yours.

Turning findings into a plan

An audit is only useful if you act on it.

  1. Rank measures by payback and ease. Low-cost, no-cost steps first.
  2. Group projects by season so work happens when the system is not needed.
  3. Estimate savings in kilowatt-hours or gallons, then dollars. Be conservative.
  4. Check incentives from your utility, state and USDA.
  5. Schedule and assign responsibility. Who does what, by when?
  6. Measure afterward to verify savings.

A simple simple payback is cost divided by annual savings, and a longer-life measure may be worth doing even at a longer payback.

Funding and incentives

  • NRCS EQIP can support practices that implement an energy audit's recommendations, including energy efficiency improvements, in many states. See the EQIP guide.
  • USDA Rural Development's Rural Energy for America Program (REAP) has offered grants and guaranteed loans for energy audits, efficiency upgrades and renewable systems for agricultural producers and rural small businesses. Check current availability and terms through farmers.gov and your local Rural Development office.
  • Utility rebates and state programs vary widely and are often the largest source of help for lighting, motors and cooling.
  • Low-interest loans from FSA and other lenders may fit efficiency investments. See sustainable finance and lending.

Programs change often, so confirm eligibility and deadlines. Local contacts are listed in the directory.

Pairing efficiency with renewable energy

Efficiency first, generation second. Reducing demand lowers the size, and cost, of a solar or wind system. A farm that installs a new array before fixing leaky pumps and inefficient motors spends more than it needs to. See solar on farms and wind energy on farms.

Keep it going

Make energy part of normal management. Review bills monthly, schedule preventive maintenance, train staff on shutoff routines and ask suppliers about efficiency when buying equipment. Some farms assign a staff member as energy lead and review progress each season.

Bottom line

Know where your energy goes, fix the cheapest losses first, use incentives and measure results. An energy audit gives you a map, and the savings often show up on the very next bill.

Frequently asked questions

What does a farm energy audit cost?

Costs vary by size and detail. Some utilities, extension offices and USDA-supported providers offer low-cost or free audits, and cost-share may be available.

What is the fastest payback upgrade on most farms?

Lighting changes, fixing leaks and controls, and pump and motor repairs or right-sizing often pay back quickly.

Should I install solar before an audit?

Do efficiency first. Cutting demand reduces the size and cost of any renewable system you need.

Is financial help available?

NRCS programs, USDA Rural Development energy programs, utility rebates and state programs may help, with terms that change over time.

Keep reading

Energy, Climate and Carbon

Solar on Farms: What to Know Before You Sign

How to evaluate rooftop, ground-mount and leased solar on farmland: sizing, costs, net metering, incentives, lease terms, decommissioning and farmland impacts.

Energy, Climate and Carbon

Carbon Markets: Basics for Farmers

How agricultural carbon markets work, who pays for what, how credits are verified, what payments look like and the questions to answer before you enroll any acres.

Energy, Climate and Carbon

Biogas and Anaerobic Digesters

How farm anaerobic digesters turn manure and food waste into biogas, what systems cost, how revenue works, what operators say about management, and where to find help.

Energy, Climate and Carbon

Carbon Contract Risks to Read Before You Sign

A clause-by-clause guide to carbon contract risks: term, penalties, data rights, payment guarantees, landlord issues and exit terms to review with an attorney.